Fault finder: BCD switch to display

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Display dark: what should I check?

Use a common-anode display and check its common pin goes to 5 V.

Wrong digit: what should I check?

Swap the order of the four inputs.

Dim segments: what should I check?

Check each resistor and the supply voltage.

Random segments: what should I check?

Check pins 3, 4 and 5 are tied to 5 V.