Fault finder: Battery runtime estimator

10 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Negative current: what should I check?

VIN+ and VIN− swapped.

Runtime far too long: what should I check?

Too short a measurement: include the Wi-Fi bursts.

ESP32 resets: what should I check?

Cell low or voltage drop through wires: charge it and shorten leads.