Projects / Sensory calm light / Fault finder

Fault finder: Sensory calm light

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Colour jumps: what should I check?

Increase the smoothing values.

No response: what should I check?

Check the FSR divider and the pin.

Too bright: what should I check?

Lower setBrightness.

Ball feels lumpy: what should I check?

Add more foam over the sensor.