Fault finder: Audio source switcher
10 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LEDs skip steps: what should I check?
Add the debounce capacitor or lengthen it.
No audio: what should I check?
Check the bias node is near 4.5 V.
Distortion: what should I check?
Lower the source volume.
