Projects / From blink to fade / Fault finder

Fault finder: From blink to fade

9 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Red LED does not fade: what should I check?

It is on a pin without PWM. Use D3, D5, D6, D9, D10 or D11 on an Uno.

Pot reads noisy: what should I check?

Wires are loose. Check the middle pin and the supply.

Green blinks unevenly: what should I check?

A delay() is still in the loop. Remove it.

Upload fails: what should I check?

Choose the right board and port in the Tools menu.