Projects / Applause meter / Fault finder

Fault finder: Applause meter

9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Top lights always on: what should I check?

Turn the module's knob to lower the sensitivity.

Nothing lights: what should I check?

Turn the knob up and check AO goes to A0.

A light never lights: what should I check?

Check its resistor and the direction of the LED.

Round never starts: what should I check?

Check the button goes to D10 and GND.

Bar flickers: what should I check?

Normal for speech, the peak light shows the top.