Fault finder: Air quality map on a bicycle
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No lines: what should I check?
Wait for the GPS fix and check the PMS wiring.
SD error: what should I check?
Format the card as FAT32 and check 5 V on the module.
Resets on the road: what should I check?
Check the boost is set to 5.0 V and well secured.
