Fault finder: Cloud AC control with IR
6 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
AC does not respond: what should I check?
Capture again and check the carrier frequency.
Capture is cut short: what should I check?
Increase the buffer size.
IR weak: what should I check?
Check the transistor and aim the LEDs.
No MQTT: what should I check?
Check broker, topic and credentials.
