Fault finder: Mushroom humidity fogger
8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Relay chatters: what should I check?
Widen the 85 to 92 band.
Humidity never rises: what should I check?
Check the tank and the fogger supply.
Sensor reads high: what should I check?
Keep it out of direct mist.
Corrosion: what should I check?
Seal the box and use conformal spray.
