Fault finder: Decode a 433 MHz weather sensor

5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Only noise appears: what should I check?

Move the sensor closer and add the antenna.

No frames: what should I check?

Check the data pin and that the sensor is on 433 MHz.

Frames differ every time: what should I check?

Look at the noise; use the long-gap rule.

Cannot find the bit meaning: what should I check?

Capture several frames at different temperatures.