Components / Raspberry Pi and Jetson / Raspberry Pi Sense HAT

Raspberry Pi Sense HAT

HAT with an 8 × 8 RGB matrix, joystick, IMU, and temperature, humidity and pressure sensors.

FunctionSensor and LED HAT
InterfaceI2C on the 40-pin header
Logic level3.3 V
SBC AccessoriesReviewedMPN Sense HATUsed in 3 projects
RASPBERR
In short

What is the Raspberry Pi Sense HAT and what is it used for?

HAT with an 8 × 8 RGB matrix, joystick, IMU, and temperature, humidity and pressure sensors. Makers use it for classroom sensor projects.

How it works

An add-on board with sensors and a microcontroller that drives the LED matrix.

Key specifications

Interface module specValue
FunctionSensor and LED HAT
InterfaceI2C on the 40-pin header
Logic level3.3 V

Pinout

40-pin headerI2C sensors and LED matrix controller

How to use it

Install sense-hat and use it in Python. It has an 8 × 8 RGB matrix, a joystick, an IMU, and humidity and pressure sensors. Heat from the Pi raises its temperature reading, so use a header extender or correct in code.

Applications

Alternatives

Buy at

Common questions

What is the Raspberry Pi Sense HAT used for?

In maker projects: classroom sensor projects.

How does the Raspberry Pi Sense HAT work?

An add-on board with sensors and a microcontroller that drives the LED matrix.

How do I connect the Raspberry Pi Sense HAT to an Arduino or ESP32?

I2C on the 40-pin header. Pins: 40-pin header (I2C sensors and LED matrix controller).

What can I use instead of the Raspberry Pi Sense HAT?

BME280 Environmental Sensor.