Raspberry Pi M.2 HAT+
Adds an M.2 M-key slot to the Pi 5 for an NVMe SSD.
FunctionPCIe to M.2 M-key adapter
InterfacePi 5 PCIe FPC
Rating2230 and 2242 SSDs
SBC AccessoriesReviewedMPN SC1166Used in 3 projects
In short
What is the Raspberry Pi M.2 HAT+ and what is it used for?
Adds an M.2 M-key slot to the Pi 5 for an NVMe SSD. Makers use it for faster storage than microSD.
How it works
A passive adapter that routes the Pi 5's single PCIe lane to an M.2 slot.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | PCIe to M.2 M-key adapter |
| Interface | Pi 5 PCIe FPC |
| Rating | 2230 and 2242 SSDs |
Pinout
PCIe FFCTo the Pi 5
M.2 M-key2230 or 2242 NVMe drive or accelerator
How to use it
Fit the SSD, connect the ribbon and set the boot order to NVMe with raspi-config. PCIe runs at Gen 2 by default, and Gen 3 is possible but not certified.
Applications
Faster storage than microSD
Builds that use it
Alternatives
- NVMe SSD 256 GB (M.2 2230/2242)Drive to fit
Common questions
What is the Raspberry Pi M.2 HAT+ used for?
In maker projects: faster storage than microSD.
How does the Raspberry Pi M.2 HAT+ work?
A passive adapter that routes the Pi 5's single PCIe lane to an M.2 slot.
How do I connect the Raspberry Pi M.2 HAT+ to an Arduino or ESP32?
Pi 5 PCIe FPC. Pins: PCIe FFC (To the Pi 5), M.2 M-key (2230 or 2242 NVMe drive or accelerator).
What can I use instead of the Raspberry Pi M.2 HAT+?
NVMe SSD 256 GB (M.2 2230/2242).
