Raspberry Pi GPIO T-cobbler with ribbon cable
Brings the 40 GPIO pins to a breadboard with labels.
FunctionGPIO breakout
Interface40-pin ribbon
Logic level3.3 V
SBC AccessoriesReviewedMPN 40-pin T-CobblerUsed in 2 projects
In short
What is the Raspberry Pi GPIO T-cobbler with ribbon cable and what is it used for?
Brings the 40 GPIO pins to a breadboard with labels. Makers use it for breadboarding with a Pi.
How it works
A ribbon and labelled breakout that bring the Pi's header onto a breadboard.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | GPIO breakout |
| Interface | 40-pin ribbon |
| Logic level | 3.3 V |
Pinout
RibbonColoured stripe is pin 1
Breadboard pinsLabelled with BCM GPIO numbers
How to use it
Push the cobbler across the breadboard's centre gap and plug the ribbon in with the stripe towards pin 1 at both ends.
Applications
Breadboarding with a Pi
Builds that use it
Alternatives
- Raspberry Pi breadboard kit (T-cobbler, 830 board)Kit with breadboard
Common questions
What is the Raspberry Pi GPIO T-cobbler with ribbon cable used for?
In maker projects: breadboarding with a Pi.
How does the Raspberry Pi GPIO T-cobbler with ribbon cable work?
A ribbon and labelled breakout that bring the Pi's header onto a breadboard.
How do I connect the Raspberry Pi GPIO T-cobbler with ribbon cable to an Arduino or ESP32?
40-pin ribbon. Pins: Ribbon (Coloured stripe is pin 1), Breadboard pins (Labelled with BCM GPIO numbers).
What can I use instead of the Raspberry Pi GPIO T-cobbler with ribbon cable?
Raspberry Pi breadboard kit (T-cobbler, 830 board).
