OV2640 camera module
2 MP camera used on the ESP32-CAM.
MeasuresImage up to 1600 × 1200
InterfaceDVP parallel
Supply voltage3.3 V
SensorsReviewedMPN OV2640
In short
What is the OV2640 camera module and what is it used for?
2 MP camera used on the ESP32-CAM. Makers use it for replacement cameras.
How it works
A 2 MP CMOS image sensor with an on-chip JPEG encoder.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Image up to 1600 × 1200 |
| Interface | DVP parallel |
| Supply voltage | 3.3 V |
Pinout
24-pin FPCPower, SCCB control, sync, clock and 8-bit data
Some breakouts bring these to header pins
How to use it
Most often used through an ESP32-CAM or ESP32-S3 board with the esp32-camera driver. Its built-in JPEG encoder makes Wi-Fi streaming practical.
Applications
Replacement cameras
Builds that use it
Not used in a published project yet.
Alternatives
- ESP32-CAMReady-made board with this camera
Common questions
What is the OV2640 camera module used for?
In maker projects: replacement cameras.
How does the OV2640 camera module work?
A 2 MP CMOS image sensor with an on-chip JPEG encoder.
What voltage does the OV2640 camera module need?
3.3 V.
How do I connect the OV2640 camera module to an Arduino or ESP32?
DVP parallel. Pins: 24-pin FPC (Power, SCCB control, sync, clock and 8-bit data), Some breakouts bring these to header pins ().
What can I use instead of the OV2640 camera module?
ESP32-CAM.
