Sensors
MiCS-5524 gas sensor
Small MEMS gas sensor for CO, alcohol and VOCs.
CO, ethanol, hydrogen, ammonia, methane (relative)Measures
AnalogInterface
5 VSupply voltage
Get this part
In short
What is the MiCS-5524 gas sensor and what is it used for?
Small MEMS gas sensor for CO, alcohol and VOCs. Makers use it for low-power gas detection.
How it works
A small MEMS metal-oxide sensor with a heater.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | CO, ethanol, hydrogen, ammonia, methane (relative) |
| Interface | Analog |
| Supply voltage | 5 V |
Pinout
5VSupply
GNDGround
A0Analog output
ENEnable heater
How to use it
Read A0 as a relative trend. It responds to many gases, so it cannot tell you which one is present.
Applications
Low-power gas detection
Builds that use it
Alternatives
- MQ-135 air quality sensor moduleCheaper, larger, similar idea
Common questions
What is the MiCS-5524 gas sensor used for?
In maker projects: low-power gas detection.
How does the MiCS-5524 gas sensor work?
A small MEMS metal-oxide sensor with a heater.
What voltage does the MiCS-5524 gas sensor need?
5 V.
How do I connect the MiCS-5524 gas sensor to an Arduino or ESP32?
Analog. Pins: 5V (Supply), GND (Ground), A0 (Analog output), EN (Enable heater).
What can I use instead of the MiCS-5524 gas sensor?
MQ-135 air quality sensor module.
