Components / Interface and audio modules / Logic Level Converter 4-channel

Logic Level Converter 4-channel

Can help connect logic circuits operating at different voltage levels when compatible.

FunctionBidirectional level shifter (BSS138 MOSFETs)
Supply voltageLV 1.8 to 3.3 V side; HV 3.3 to 5 V side
Interface4 channels, each works both ways
RatingGood for I2C and slow SPI; up to a few hundred kHz
InterfacesReviewedMPN BSS138 4-channelUsed in 1 project
LOGIC
In short

What is the Logic Level Converter 4-channel and what is it used for?

Can help connect logic circuits operating at different voltage levels when compatible. Makers use it for compare direction/speed requirements.

In the real world

I2C interface connections

How it works

Interface modules bridge data or electrical signaling; verify individual module schematic and signal levels.

Key specifications

Interface module specValue
FunctionBidirectional level shifter (BSS138 MOSFETs)
Supply voltageLV 1.8 to 3.3 V side; HV 3.3 to 5 V side
Interface4 channels, each works both ways
RatingGood for I2C and slow SPI; up to a few hundred kHz
Logic levelTranslates between LV and HV levels

Pinout

HV / LVThe two supply voltages (both must be connected)
GNDShared ground
HV1 to HV4High-voltage side signals
LV1 to LV4Low-voltage side signals

How to use it

Connect both supplies and the ground, then pass each signal through a channel. Fine for I2C; too slow for fast SPI displays, which need a 74HC/74LVC buffer.

Applications

Buy at

Common questions

What is the Logic Level Converter 4-channel used for?

In products: I2C interface connections. In maker projects: compare direction/speed requirements.

How does the Logic Level Converter 4-channel work?

Interface modules bridge data or electrical signaling; verify individual module schematic and signal levels.

What voltage does the Logic Level Converter 4-channel need?

LV 1.8 to 3.3 V side; HV 3.3 to 5 V side.

How do I connect the Logic Level Converter 4-channel to an Arduino or ESP32?

4 channels, each works both ways. Pins: HV / LV (The two supply voltages (both must be connected)), GND (Shared ground), HV1 to HV4 (High-voltage side signals), LV1 to LV4 (Low-voltage side signals).