IDC ribbon connector 2 × 5
Ribbon cable connector for programmers.
TypeIDC
Pitch2.54 mm
Pins10
ConnectorsReviewedMPN IDC 10 pin
In short
What is the IDC ribbon connector 2 × 5 and what is it used for?
Ribbon cable connector for programmers. Makers use it for ISP and JTAG cables.
How it works
Blades cut through the insulation as it is pressed on.
Key specifications
| Connector spec | Value |
|---|---|
| Type | IDC |
| Pitch | 2.54 mm |
| Pins | 10 |
Pinout
102 × 5
Pin 1Red stripe side
How to use it
Press the ribbon in with a vice, keeping the stripe at pin 1 and the key notch matched.
Applications
ISP and JTAG cables
Builds that use it
Not used in a published project yet.
Alternatives
Common questions
What is the IDC ribbon connector 2 × 5 used for?
In maker projects: ISP and JTAG cables.
How does the IDC ribbon connector 2 × 5 work?
Blades cut through the insulation as it is pressed on.
What can I use instead of the IDC ribbon connector 2 × 5?
Rainbow ribbon cable (10 core).
