ENS160 air quality sensor
Multi-gas sensor that gives AQI, TVOC and eCO2.
MeasuresAQI, TVOC, eCO2
InterfaceI2C or SPI
I2C address0x52 or 0x53
Supply voltage1.71 to 1.98 V core (modules have a regulator)
SensorsReviewedMPN ENS160Used in 3 projects
In short
What is the ENS160 air quality sensor and what is it used for?
Multi-gas sensor that gives AQI, TVOC and eCO2. Makers use it for indoor air stations.
How it works
A multi-element metal-oxide sensor with on-chip algorithms.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | AQI, TVOC, eCO2 |
| Interface | I2C or SPI |
| I2C address | 0x52 or 0x53 |
| Supply voltage | 1.71 to 1.98 V core (modules have a regulator) |
Pinout
VIN3.3 to 5 V on modules
GNDGround
SCLI2C clock
SDAI2C data
ADDAddress 0x52 or 0x53
CSSPI select
INTInterrupt
How to use it
Often sold on a board with an AHT21 for temperature and humidity compensation. Use the ScioSense or DFRobot library. Values settle after the first hour and improve over days.
Applications
Indoor air stations
Builds that use it
Alternatives
- SGP40 VOC sensorVOC index sensor
- SCD40 CO2 sensorReal CO2
Common questions
What is the ENS160 air quality sensor used for?
In maker projects: indoor air stations.
How does the ENS160 air quality sensor work?
A multi-element metal-oxide sensor with on-chip algorithms.
What voltage does the ENS160 air quality sensor need?
1.71 to 1.98 V core (modules have a regulator).
How do I connect the ENS160 air quality sensor to an Arduino or ESP32?
I2C or SPI. Pins: VIN (3.3 to 5 V on modules), GND (Ground), SCL (I2C clock), SDA (I2C data), ADD (Address 0x52 or 0x53), CS (SPI select).
What can I use instead of the ENS160 air quality sensor?
SGP40 VOC sensor and SCD40 CO2 sensor.
