Common-mode choke (mains)
Choke for mains EMI filters.
ValueAbout 10 to 20 mH
PackageUU core
PassivesReviewedMPN UU9.8 choke
In short
What is the Common-mode choke (mains) and what is it used for?
Choke for mains EMI filters. Makers use it for SMPS input filters.
How it works
Two windings on one core block noise that flows the same way in both wires but pass normal current.
Key specifications
| Passive component spec | Value |
|---|---|
| Value | About 10 to 20 mH |
| Package | UU core |
Pinout
Two windingsLive through one, neutral through the other
How to use it
Part of a mains EMI filter, with X2 and Y capacitors. Mains work needs a qualified person.
Applications
SMPS input filters
Builds that use it
Not used in a published project yet.
Alternatives
- X2 safety capacitor 0.1 µF 275 V ACFilter partner
Common questions
What is the Common-mode choke (mains) used for?
In maker projects: SMPS input filters.
How does the Common-mode choke (mains) work?
Two windings on one core block noise that flows the same way in both wires but pass normal current.
What can I use instead of the Common-mode choke (mains)?
X2 safety capacitor 0.1 µF 275 V AC.
