Bridge rectifier KBPC3510 (35 A)
Four-diode bridge in a metal case with spade terminals.
TypeBridge rectifier
Max voltage1000 V
Max current35 A with heatsink
Key figureDrop about 1.1 V per diode, two conduct at a time
SemiconductorsReviewedMPN KBPC3510
In short
What is the Bridge rectifier KBPC3510 (35 A) and what is it used for?
Four-diode bridge in a metal case with spade terminals. Makers use it for battery chargers, high-current DC.
How it works
Four diodes arranged so both halves of the AC wave come out positive.
Key specifications
| Diode or transistor spec | Value |
|---|---|
| Type | Bridge rectifier |
| Max voltage | 1000 V |
| Max current | 35 A with heatsink |
| Key figure | Drop about 1.1 V per diode, two conduct at a time |
| Package | KBPC metal |
| Pin order | Marked ~, ~, +, − |
Pinout
~AC input
~AC input
+DC positive output
−DC negative output
How to use it
Bolt it to a heatsink with thermal paste; at 10 A it wastes over 20 W. Follow with a large filter capacitor. Mains-side wiring must be insulated and enclosed.
Applications
Battery chargershigh-current DC
Builds that use it
Not used in a published project yet.
Alternatives
- Bridge rectifier DB107 (1 A)Small 1 A bridge
Common questions
What is the Bridge rectifier KBPC3510 (35 A) used for?
In maker projects: battery chargers, high-current DC.
How does the Bridge rectifier KBPC3510 (35 A) work?
Four diodes arranged so both halves of the AC wave come out positive.
What can I use instead of the Bridge rectifier KBPC3510 (35 A)?
Bridge rectifier DB107 (1 A).
