Bi-colour LED red/green (3-pin)
Red and green LEDs in one package with a common pin.
Colour / typeRed and green
Forward voltageAbout 2 V each
Max continuous current20 mA each
Package5 mm, 3 pins
OptoelectronicsReviewedMPN Bi-colour 5mmUsed in 2 projects
In short
What is the Bi-colour LED red/green (3-pin) and what is it used for?
Red and green LEDs in one package with a common pin. Makers use it for status: OK and fault.
How it works
Two LED dies sharing one lead.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | Red and green |
| Forward voltage | About 2 V each |
| Max continuous current | 20 mA each |
| Package | 5 mm, 3 pins |
Pinout
MiddleCommon (usually cathode, check)
OuterRed and green anodes
How to use it
Use a resistor on each colour. Light both for yellow-orange.
Applications
Status: OK and fault
Alternatives
- RGB LED 5 mm common cathodeFull colour
Common questions
What is the Bi-colour LED red/green (3-pin) used for?
In maker projects: status: OK and fault.
How does the Bi-colour LED red/green (3-pin) work?
Two LED dies sharing one lead.
What voltage does the Bi-colour LED red/green (3-pin) need?
About 2 V each.
What can I use instead of the Bi-colour LED red/green (3-pin)?
RGB LED 5 mm common cathode.
