Arduino Nicla Vision
Tiny board with a 2 MP camera, IMU, mic and distance sensor for edge vision.
MicrocontrollerSTM32H747 dual-core
Logic level3.3 V
WirelessWi-Fi, Bluetooth LE
Development BoardsReviewedMPN ABX00051Used in 1 project
In short
What is the Arduino Nicla Vision and what is it used for?
Tiny board with a 2 MP camera, IMU, mic and distance sensor for edge vision. Makers use it for small machine-vision projects.
How it works
An STM32H747 dual core with a camera, sensors and Wi-Fi and Bluetooth LE on a 22.86 mm square board.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | STM32H747 dual-core |
| Logic level | 3.3 V |
| Wireless | Wi-Fi, Bluetooth LE |
Pinout
ESLOV5-pin I2C and power connector
Header3.3 V GPIO, I2C, SPI, UART
Battery3.7 V LiPo pads
How to use it
Program with OpenMV IDE in MicroPython or with Arduino. It has a 2 MP GC2145 camera, VL53L1X distance sensor, LSM6DSOX IMU and microphone. Edge Impulse supports it for image classification.
Applications
Small machine-vision projects
Builds that use it
Alternatives
- ESP32-S3 Eye camera (Espressif)Cheaper camera board
- Raspberry Pi AI CameraCamera with on-sensor AI for a Pi
Common questions
What is the Arduino Nicla Vision used for?
In maker projects: small machine-vision projects.
How does the Arduino Nicla Vision work?
An STM32H747 dual core with a camera, sensors and Wi-Fi and Bluetooth LE on a 22.86 mm square board.
What can I use instead of the Arduino Nicla Vision?
ESP32-S3 Eye camera (Espressif) and Raspberry Pi AI Camera.
