1602 Character LCD
Character display module family commonly used with HD44780-compatible controllers.
What is the 1602 Character LCD and what is it used for?
Character display module family commonly used with HD44780-compatible controllers. Makers use it to display a message.
Instrumentation readouts
Displays present information; controllers, pinouts, interfaces and voltage levels vary by module.
Key specifications
| Display spec | Value |
|---|---|
| Type | Character LCD with backlight |
| Size | 16 characters × 2 lines |
| Resolution | 5 × 8 dots per character |
| Driver IC | HD44780 compatible |
| Interface | 4/8-bit parallel, or I2C with a PCF8574 backpack |
| I2C address | 0x27 or 0x3F with the I2C backpack |
| Supply voltage | 5 V (3.3 V versions exist) |
Pinout
How to use it
Buy it with the I2C backpack: 4 wires instead of 12. If the screen shows a row of blocks, adjust the contrast trimmer; if nothing, check the address with a scanner.
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27, 16, 2);
void setup() { lcd.init(); lcd.backlight(); lcd.print("Hello, Lark!"); }
void loop() { lcd.setCursor(0, 1); lcd.print(millis() / 1000); }Applications
Builds that use it
Alternatives
- SSD1306 OLED DisplaySmaller, graphics, no backlight needed
Common questions
What is the 1602 Character LCD used for?
In products: instrumentation readouts. In maker projects: display a message.
How does the 1602 Character LCD work?
Displays present information; controllers, pinouts, interfaces and voltage levels vary by module.
What voltage does the 1602 Character LCD need?
5 V (3.3 V versions exist).
How do I connect the 1602 Character LCD to an Arduino or ESP32?
4/8-bit parallel, or I2C with a PCF8574 backpack. Pins: With I2C backpack (GND, VCC, SDA, SCL), VO (pin 3) (Contrast; turn the backpack's blue trimmer if you see blocks or nothing), RS, E, D4 to D7 (Parallel mode control and data), A / K (Backlight anode / cathode).
What can I use instead of the 1602 Character LCD?
SSD1306 OLED Display.
