128x64 graphic LCD (ST7920)
Large monochrome graphic LCD, used on 3D printer panels.
TypeMonochrome graphic LCD
Resolution128 × 64
Driver ICST7920
InterfaceParallel or serial (SPI-like)
DisplaysReviewedMPN 12864 ST7920Used in 3 projects
In short
What is the 128x64 graphic LCD (ST7920) and what is it used for?
Large monochrome graphic LCD, used on 3D printer panels. Makers use it for big menus, printer screens.
How it works
An ST7920 controller with built-in Chinese fonts driving a 128 × 64 graphic LCD.
Key specifications
| Display spec | Value |
|---|---|
| Type | Monochrome graphic LCD |
| Resolution | 128 × 64 |
| Driver IC | ST7920 |
| Interface | Parallel or serial (SPI-like) |
| Supply voltage | 5 V |
Pinout
1VSS (GND)
2VDD (5 V)
3V0 contrast
4RS (CS in serial mode)
5R/W (data in serial mode)
6E (clock in serial mode)
15PSB (GND for serial)
1920Backlight A K
How to use it
Tie PSB to GND for serial mode and use U8g2's ST7920 constructor with three wires. This is the screen on many 3D printer controllers.
Applications
Big menusprinter screens
Builds that use it
Alternatives
- 20x4 LCD with I2C backpackText only, simpler
- 2.42 inch OLED (SSD1309)OLED of a similar size
Common questions
What is the 128x64 graphic LCD (ST7920) used for?
In maker projects: big menus, printer screens.
How does the 128x64 graphic LCD (ST7920) work?
An ST7920 controller with built-in Chinese fonts driving a 128 × 64 graphic LCD.
What voltage does the 128x64 graphic LCD (ST7920) need?
5 V.
How do I connect the 128x64 graphic LCD (ST7920) to an Arduino or ESP32?
Parallel or serial (SPI-like). Pins: 1 (VSS (GND)), 2 (VDD (5 V)), 3 (V0 contrast), 4 (RS (CS in serial mode)), 5 (R/W (data in serial mode)), 6 (E (clock in serial mode)).
What can I use instead of the 128x64 graphic LCD (ST7920)?
20x4 LCD with I2C backpack and 2.42 inch OLED (SSD1309).
